O Rings

O-Rings are produced as a result of the vulcanization of the rubber which is carried out by presses fitted with steel moulds. Different types of rubber moulding are adopted, but the most common used for the specific production of standardized pieces such as O-Rings is the injection method with closed moulds as it permits the production of large volumes at extremely competitive prices.

Raw materials used are supplied by the most prestigious companies in this field, and include Nitrile (NBR), (Silicone (VMQ), Fluorosilicone (FVMQ), Fluorocarbon (Viton® / FPM), Perfluorocarbon (Kalrez®, Chemraz® FFPM), Ethylene-Propylene (EPDM), Hydrogen Nitrile (HNBR), Teflon® (PTFE).
NewDeal Seals experts will be happy to give advice on the material suitable to your application.

Available Sizes

Considerable quantities of O-rings are available from stock, covering sizes in the range 1mm — 1200mm D1. These sizes are according to the following standards:

• BS1806 - AS568 (section D2 = 1.78 - 2.62 - 3.53 - 5.34 - 6.99)
• French (section D2 = 1.0 - 1.6 - 1.9 - 2.7 - 3.6 - 5.34 - 6.99)
• Spanish - AN6227 (section as per BS1806 - AS568)
• Swedish - SMS 1586 (section D2 = 1.6 - 2.4 - 3.0 - 5.7 8.4)
• Metric Sizes (section D2 = 1.0 - 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0 - 4.5 - 5.0)
• (and non standard)